1.Fully open design,convenient for real-time observation of instrument operation status.

2.Large industrial touch screen,all Chinese operating system,convenient and fast parameter setting,and beautiful interface.

3.Alarm system:Chinese voice alarm,panel indicator light RGB three color prompts,and text in the main interface alarm indicator bar to indicate alarms,all three alarm synchronization prompts.Operators can process corresponding alarm information based on instrument alarm prompts.

4.After the protective cover is opened,the mechanical arm has a protective function of automatically stopping operation to prevent injuries to workers.When the robotic arm has abnormal resistance,it automatically pauses
and the touch screen interface prompts related error messages.The instrument does not need to power off and follows the corresponding prompts to handle the fault information.

5.It can form an integrated dyeing and sealing workstation with the dyeing machine,without the need for a separate transport device.

6.The sealed slides are directly transported to the slide plate for direct reading,without the need for manual transportation,saving manpower and improving department efficiency.

7.Pressure type dispensing system,which can adjust the pressure according to the viscosity of the adhesive to stabilize dispensing.

8.Install an air quality sensor inside the instrument to monitor the air quality inside the instrument.The instrument can automatically turn on or off the exhaust fan based on the air quality situation,achieving closed-loop control of the air quality inside the instrument.

9.Loading an activated carbon purification device,harmful gases are filtered by activated carbon and discharged,ensuring health and environmental protection.

10.Intelligent tilt angle cover to prevent the generation of bubbles during sealing.

11.Use precision detection sensors to perform self inspection on damaged cover slides and automatically handle debris.

12.Pneumatic fingers can grip or release glass slides to achieve safe and reliable transportation.

13.The status of each layer can be displayed in three states:completed,in progress,and pending.The information of each currently in progress can be viewed in real-time.